- Count-up or countdown up to 99 hours
- Reference time from NTP, IRIG-B or SMPTE (30/25/24 fps non drop frame)
- Generate SMPTE (30/25/24 fps non drop frame)
- Control an unlimited number of network clocks and devices via Ethernet
- Control an unlimited number time code clocks via SMPTE BNC output
- Real time clock chip retains time during loss of power or time reference
- Modes include countdown, count-up, count to time, and clock
- 6-digit LED display
RC600 Countdown/Count-up Clock Controller
The RC600 is a remote control that adds both countdown and count-up timer control features to our NTDS and TCDS clocks. Reference or generate time input from NTP or time code (IRIG & SMPTE). Control a virtually unlimited number of time code clocks and network clocks.
Reference Documents
SpecificationsRC600 Countdown/Count-up Clock Controller
Controls
- Illuminated buttons for Mode Select (count-up, count-down, clock) and Action (start/pause/reset)
Output
- Ethernet timer control packets for NTDS clocks
- SMPTE time code via BNC
- Current model max count = 99 hours
- USB for configuration via WinDiscovery
Network Compatibility
- Supports NTP, DHCPv4, DHCPv6 for automatic acquisition of network address, name servers, and timeserver configuration
- Telnet/SSH communication
- IPv4/IPv6 compatible
- SNMP with custom MIB
Power
- DC input (115-230, 50/60 Hz)
- Includes external 24 VDC wall-mount power supply with locking DC plug (UL and CE listed)
- PoE input (48 VDC, IEEE 802.3af)
Interface
- Network or direct com to NTDS via RJ45
- Time code in and out via BNC connectors
- Direct com to TCDS via RJ12 (RS485)
Connectors
- RJ45 - 10/100MB Ethernet
- BNC for time code in/out
- USB for configuration
- DC input - 2.1 mm male jack
Configuration
- Configure devices through provided WinDiscovery software or Telnet/SSH
- Configuration is saved to nonvolatile memory and survives power losses
- Authenticated network messages prevent unauthorized tampering of clock configuration
Operating Parameters
- Temperature: 0 to 60°C
- Humidity: Up to 90% (non-condensing)
Physical
- Size: 6.82w x 5.24h x 2.37d in (17.32w x 13.31h x 6.02d cm)
- Weight: 2 lbs (0.9 kg)
- Black powder coated steel chassis
- Rubber feet for tabletop use
Compliance
- FCC, ROHS, CE Marked, ANSI
Additional Resources
Related Products
Standard GPS AntennaGPS Antenna
The "standard" package allows cable lengths up to 500 ft (150 m). The antenna is water/moisture resistant, with 26 dB and 32 dB amplification respectively and are suitable for indoor or outdoor mounting.
Learn More
RC1000Dual-Channel Production Timer
The RC1000 is a dual-channel up/down production timer for count and control applications. Supporting network and time code, this device is essentially two counters in one. Counts are entered via a numeric keypad and a new count can be started during a current count or after it has stopped.
Learn More
DA12Dual Channel Distribution Amplifier
The DA12 is a dual-channel distribution amplifier for SMPTE, EBU, IRIG-B, 1PPS and other signals. It isolates and amplifies time code, RF and electronic pulses to a dozen leads. The DA12 is an Ideal hub for clock systems distributed over large areas and distances.
Learn More
Related Articles
Industry LiteratureNetwork Timing Technology: NTP vs. PTP
Time synchronization serves a fundamental role in any network, but it's too often added as an afterthought. However, it can mean the difference between correctly troubleshooting a conflict in…
Read Article
Industry LiteratureGPS vs GNSS: Understanding PNT Satellite Systems
To most people, GNSS satellites are something vague that fly around in the upper atmosphere. From there, the technical details tend to get a bit hairy. As long as they function…
Read Article
Industry LiteratureHow Does GPS Network Time Synchronization Work?
Whether you're trying to get people to show up for a meeting or managing a scalable cloud-based business application, synchronicity is vital. Countless stakeholders and machines play…
Read Article
Industry LiteratureGPS Antenna & Cable Information
The Global Positioning System (GPS) is a worldwide radio-navigation system formed from a constellation of 24 satellites that continuously orbit the earth. Each GPS satellite has on…
Read Article
Industry LiteratureWhy You Need an NTP Server
A network time server is not something many business owners think of, and timekeeping is usually not a priority for network administrators. However, proper network time synchronization…
Read Article
Industry LiteratureUnderstanding IRIG-B Time Code
Accurate timing and synchronization can be accomplished in many ways. While your specific choice of technique depends on your requirements, adhering to proven standards make your systems…
Read Article
Presentation by John Clark, CEO & Dr. Demetrios Matsakis, Chief ScientistTime Behind and Beyond the Clock
